EnveoTherm Mesh 131
Product description
EnveoTherm R131 is one of our best selling meshes and is used in EnveoTherm ETICS systems. Product is designed to meet main quality requirements and standard for glassfibre meshes:
- CE certified since 2013
- Regularly audited and tested by main European laboratories CSTB, DiBT, TZUS
Area of application
Thanks to the balanced construction, high tensile strength and alkali resistance EnveoTherm R131 prevents any potential crack creation and by that protects the whole system from water infiltration and mould development. The life time of any system is by that prolonged to maximum.
- Mandatory component of ETIC systems
- Facade render reinforcement
- Interior plaster reinforcement
Product benefits
Made from E-glass
Alkali resistant coating
High tensile strength
Dimensionally stable
Technical description
| BASIC PARAMETERS | UNIT | PERFORMANCE |
|---|---|---|
| Mass per unit area | g/m2 | 163 ± 5% |
| Mesh opening warp/weft | mm | (3,5/3,8) ± 0,5 |
| Thickness | mm | 0,55 ± 0,1 |
| Technical specification | EAD 040016-01-0404 |
Installation
- Firstly, corner and window profiles should be correctly applied on the prepared surface. Then install the 30 × 50 cm mesh strips diagonally to avoid cracking.
- Apply the first layer of base coat over the entire surface.
- Apply the mesh from the top to the bottom of the wall by pressing it into the first layer of the base coat (starting from the centre then out to the side).
- The overlap between the two mesh strips should be a minimum of 10 cm to ensure continuity of reinforcement.
- Apply the rest of the base coat keeping the mesh in the upper third.
About EnveoTherm
EnveoTherm is an external insulation system that combines exceptional performance with versatile design options. It was developed to meet the highest standards of modern construction, as well as the requirements of most demanding customers.
Explore its key benefits.
Related products
EnveoGrund
EnveoGrund is a silicate-silicone facade primer for surface stabilization, regulation of absorption, improvement of adhesion, prolongation of open working time of the facade plaster and increased water repellent of the facade system.
EnveoTherm Mesh 117
EnveoTherm Mesh 117 is one of our best selling meshes and is used in EnveoTherm ETICS systems.
EnveoTherm Mesh 3F
Apply EnveoTherm Mesh 3F in exactly the same way as any other mesh, but thanks to it's tri-directional yarns, without the need for diagonal mesh strips around openings.
Contact us
Phone: +381 11 314 96 84